TAJIMA TCMX 601, Руководство пользователя

Страница: 100 / 130

Software installation and necessary
11-7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
4.
Machine type
Set specific information of the machine.
1.
To call the screen......................................................
2.
To set ........................................................................
1.
Machine Name
2.
[E] key
Pressing [E] will display the message of under
processing, and the screen will return to the list screen
(It takes a while).
3.
Turn OFF and ON the power............................................. End
When turning OFF/ON the power, wait for five seconds
or more.
3.
Set “Frame origin memory” continuously (p.11-8).
CAUTION
After installation of software, decide the contents of
setting again. (Even if the same spec. as the machine is
registered after installation of software, this setting is
necessary).
After the setting, turn OFF/ON the power (When turning
OFF/ON the power, wait for five or more seconds).
Neglect of this operation could cause malfunctioning of
the machine.
!
3 Machine Type
SET
F4
Machine Name
S
Only “Machine Name” is displayed.
Even if the same spec. as the machine is registered after
installation of software, press [SET] to decide the contents,
and then press [E]. After a while, the screen will return to the
list screen. After that, turn OFF/ON the power. When turning
OFF/ON the power, wait for five or more seconds.
F4
List screen List screen
3 Machine Type
or
F4
When you continuously perform this setting after
“Language” setting, this operation is unnecessary.
S
Example:S
(Single head machine)
Processing
JZ07