TAJIMA TCMX 601, Руководство пользователя

Страница: 121 / 130

15-2
Supplemental documentation
1.
Terminology
A
ABSOLUTE ORIGIN
A mechanical origin to detect the absolute origin of embroidery frame
AFC
Abbreviation of Automatic Frame Changer Device for performing automatic embroidery continuously against piece goods fabric
to be embroidered
AFC VALVE
Air valve that activates AFC
APPLIQUE
The method to sew colored clothes, etc. that are cut to various shapes on the material
ATH
Abbreviation of Automatic Thread Trimming and Holding Device
AUTOMATIC FRAME TRAVEL
Automatic frame travel by inner processing in such an occasion as at the end of embroidery or during set of offset
AUTOMATIC JUMP
To make jump automatically when a stitch length exceeds the setting value
AUTOMATIC LUBRICATION SYSTEM
An optional device to lubricate to each factor of the machine head and rotary hook section
B
BOBBIN CHANGER
A device attached to the bottom of a machine table that changes bobbins automatically (option)
BORDER FRAME
A kind of embroidery frames. It holds cut cloth (material) of some extent of size to be stretched.
BORING DEVICE
A device that makes hole(s) on the cloth (material) by knife attached to the needle bar to add values to embroidery
BUFFER (BUFFER MEMORY)
Buffer memory media to smooth input/output of data
C
CAP FRAME
A kind of embroidery frames for embroidery on cap. There are two types of cap frame. One is wide cap frame, another is semi-
wide cap frame. The wide cap frame can embroider wider area of circumference directions compared with the semi-wide cap
CHECK SUM
A kind of measures to detect error of data transfer or saved (memory) contents
CLEANUP
To make preceding and succeeding stitches absorb fine stitches in a design data for removal to prevent thread coming off or thread
breakage
CODE FORMAT
Data type (tape code) for data input
COILING
To coil cord-shaped material around core thread to be sewn on the material to be embroidered
CONDITION DATA
Setting data for needle bar setting, design scale up/down, rotation, reversion, repeat, design start position, and automatic offset that
are included in design data
CORDING DEVICE
The device that sews cord-shaped material on the material to be embroidered
CURSOR
A mark that indicates the position where character or value is to be input/displayed on the screen. Some of marks blink or reverse
character.
CYLINDRICAL FRAME
A type of embroidery frame. Frame used to perform embroidery on tubular material such as a head cover of golf club (option).
D
D-AXIS
Driving shaft to rotate sewing needle or nipple (TCMX series)
DATA CONVERSION
To reduce/enlarge, rotate, or reverse the original design data
DATA SET
Operation to decide a series of setting contents in data input
JZ07