TAJIMA TCMX 601, Руководство пользователя

Страница: 52 / 130

Functions that are frequently used
5-11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Outline of offsetting at automatic color change......................
1.
When you change fabric and start the machine, the embroi-
dery frame will move to the start position of design (C)
through the middle position (B), and embroidery will start.
2.
The machine will stop at the free setting point (D) in the
middle of embroidery to perform thread trimming, and the
embroidery frame will move to the offset start position (A)
through the middle position (B).
3.
Place applique.
4.
When you start the machine, the embroidery frame will move
to the free setting point (D) through the middle position (B)
and embroidery will continue.
5.
The machine will stop at the end position of design (E) to
perform thread trimming, and the embroidery frame will
move to the offset start position (A) through the middle
position (B).
It is possible to perform this example when the following
settings are set to “to perform”.
“Automatic offset” (p.5-12)
“Automatic start” (p.4-8)
Even if “automatic offset” is not set, the frame will move
at color change when (offset mark) is displayed. In
this case, the start position of design (A) will substitute
the offset start position (E).
6
f
L 4
5
e
C 3
Offset mark
C
A
B
To C
D
A
B
To A
D
A
B
Dto
If there is no middle position (B), the frame will not go
through.
B: Middle position
C: Start position of design
D: Free setting point
E: End position of design
A
B
E
D
C
1
1
2
2
4
4
5
5
A: Offset start position
* The numbers show
the contents of movements
explained as shown left.
E
A
B
To A
JZ07