TAJIMA TCMX 601, Руководство пользователя

Страница: 60 / 130

Convenient functions
6-3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2.
Manual origin return
This function makes the embroidery frame move to the origin (start
position of design) in the middle of embroidery.
1.
To call the screen......................................................
2.
Manual origin return........................................... End
Selecting will cause the warning buzzer to sound.
The frame will move to the origin.
Switching the screen
Main screen.....................
(twice)
Other setting • operation .
3.
Total stitch counter/design time
Make the machine display the total number of stitches embroidered up
to now (total stitch counter) and the elapsed time from data set up to
now.
1.
To call the screen......................................................
To reset total stitch counter
Design time will be reset when changing the design (at
data set).
Switching the screen
Main screen.....................
(twice)
Other setting • operation .
CAUTION
When performing this operation, do not put your
hands, etc. near needle or on the machine table. Since
needle bar will move up/down, you could be injured.
Performing this operation in the middle of embroidery will
cause the frame to move to the origin after thread trim-
ming.
When automatic offset is set, the offset start position (D)
will become the origin.
D
Design start position
!
List screen List screen D1
Press
D1
3 Manual Origin Return
or
Manual origin return
Example: to execute
E
A D2 F1 F6
The number of total stitches up to now
Elapsed time up to now
Hour, minute, second will be displayed. (The above
example shows 9 hours 50 minutes 8 seconds)
2 Total Stitch Counter/Design Time
from data set
List screen List screen
C
Press ?
C
2 Total Stitch Counter/Design Time
or
0
Select “0”.
9:50:8 0: 0: 0
E
A D2 F1 F6
JZ07