TAJIMA TCMX 601, Руководство пользователя

Страница: 101 / 130

11-8
Software installation and necessary
5.
Frame origin memory
Make the machine memorize the origin of the embroidery frame (the
center of the embroidery space).
Perform frame origin memory in the following conditions..
After installation of software
The frame might move when the power was turned OFF.
1.
To call the screen......................................................
2.
Execute.............................................................. End
Selecting “ ” will cause warning buzzer to sound.
Pressing [SET] will cause the frame to return to the
original position after moving to the origin.
Switching the screen
Main screen ....................
Other setting • operation.
3.
After that, perform “Setting for password” (p.11-9),
Setting for each setting item (parameter) (p.11-11).
CAUTION
Do not perform this operation in the middle of
embroidery. It is not possible to operate manual offset
or manual origin return after moving to the origin (it will
become impossible to continue the embroidery).
When performing this operation, do not put your
hands, etc. on the machine table. You could be injured
by moving frame.
“Frame origin memory” is already set at the shipment of
the machine.
If memorized position of the origin is wrong, frame posi-
tion (coordinates) will not be displayed correctly (p.3-5)
or power resume (p.6-4) operation will not be performed
correctly.
The origin (1) is the center of the embroidery space (2).
1
2
X: 0.0, Y:0.0
!
: Not to perform frame origin memory
: To perform frame origin memory
9 Frame Origin Memory
SET
F2
F2
List screen List screen
9 Frame Origin Memory
or
F2
Example: to perform
E
A D2 F1 F6
JZ07