TAJIMA TCMX 601, Руководство пользователя

Страница: 102 / 130

Software installation and necessary
11-9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
6.
Setting for password
Set password.
Input of the password is necessary for the following setting and
operation.
Floppy disk processing (Save) (p.7-9)
Memory card processing (Save) (p.7-12)
Limit of max revolution (p.9-4)
1.
To call the screen......................................................
2.
Input the current password. ......................................
1.
First character
In this example, the current password is “0000”.
2.
Second character
The first character will be replaced with “*” for display.
3.
Third character
The second character “0” will be replaced with “*” for
display.
4.
Fourth character
The third character “0” will be replaced with “*” for
display.
5.
Decide the password.
The fourth character “0” will be replaced with “*” for
display.
When the password is wrong, code number 2C7 will be
displayed. Input the password again after pressing the
reset key ( ).
The password is set to “0000” at the shipment of the
machine.
Call the main screen, and then start operation.
When you perform installation of software (p.11-2) or ini-
tialization of memory (p.7-15), the password will return to
the initial value (0000).
List screen
1 Password
F1
1 Password
Setting range: 4 to 8 characters
Password will be displayed with “****”.
Only capital letters of English characters can be input.
SET
F1
0
Example:0
0
Example:0
0
Example:0
0
Example:0
Enter
Select Enter.
JZ07