TAJIMA TCMX 601, Руководство пользователя

Страница: 77 / 130

7-12
Design data, memory processing
7.
Memory card processing (Save)
Write design data (memory design) stored in the memory into a
memory card.
1.
Set the memory card.
2.
Input the password............................................................
1.
Input of password
The value at shipment is “0000”. In this example, the
customer has already changed the password to “M***”.
(p.11-9).
2.
Input the remaining password
Input a password up to the fourth digit in the same
manner.
3.
Decide the password.
When the password is wrong, code number 2C7 will be
displayed. Input the password again after pressing the
reset key (
).
It is necessary to input a password (p.11-9).
4 Memory Card Processing (Save)
Setting range: 4 to 8 digits
Password will be displayed with “****”.
Only capital letters of English characters can be input.
List screen List screen
4 Memory Card Processing (Save)
or
Press ?
M
Example: M
3
Example: 3
Enter
Select Enter.
JZ07