Tadiran Telecom FlexSet 280, Руководство пользователя

Страница: 48 / 132

3-6
Coral Terminal Equipment
W
all M
ount/D
esk El
evati
on
3
Wall Mounting (Using Wall Socket)
In some countries the wall socket is equipped with two pins for wall mounting. In
such a case, there is no need to use the three screws and wall plugs included in the
wall mount kit.
Figure 3-7 Wall Mount
Bracket (Using Wall LAN
Socket Pins)
1. To mount the Wall mount bracked on the wall (see
Figure 3-8
), use the cut outs (D)
to algin the Wall mount bracket with the pins that are attached to the wall socket,
and then slide it down into place.
Figure 3-8 Side View,
Completed Wall Mounting
Bracket (Using Wall
Socket)
2. Insert the two rubber bumpers into upper holes, as shown in
Figure 3-3
.
3. Connect the headset cord and feed it through the groove located at the bottom of
the phone’s back.
4. Feed the line cord through the cutout on the bracket, and connect it to the
telephone and to socket (C), see
Figure 3-7
(do not feed it through its groove).
It is recommended to use a 4-6 inch (10-15 cm) line cord (not supplied) when
connecting directly onto a wall socket pins.
Top and
bottom
pins
Central Cutout
for Wall Socket
and Line Cord
(C)
Middle
Cutouts
(D)
Wall Jack Wall Mounting Bracket
WA
LL
Wall Mounting
Bracket