Tadiran Telecom FlexSet 280, Руководство пользователя

Страница: 40 / 132

2-12
Coral Terminal Equipment
Fle
xSet T
roubles
hooting
2
Installing FlexSet telephones with a display size or type different than the Coral
default requires making manual changes to the PI (Program Interface). This
parameter cannot be specified for FlexSet phones that are identified by the system as
being without displays. In order to change the display parameter:
1. Go to the PI branch: KEYSET Definition
(Route: KEY)
.
2. Set the parameter DISPLAY_SIZE to reflect the actual size of the telephone display.
If the Coral incorrectly identifies the actual display size of the telephone, the display
will be incorrect. The following tables list the possible display discrepancies:
Table 2-3 “Display Size Mismatch Errors”
,
Table 2-4 “Display Size (Coral Version 15 or higher)”
Table 2-5 “Display Size (Coral Version 14.67 and below)”
Table 2-3 Display Size
Mismatch Errors
Table 2-4 Display Size
(Coral Version 15 or
higher)
9 Displays
Actual Size PI Setting Result
DSP48 DSP80 The display appears garbled
DSP80 DSP48 The display moves right and shows
16 x 2 characters
Entry Type Description
0 No display FlexSet 120 &120L/DST/ADPL/CPA
2 DSP48 FlexSet 120D (2 rows x 24 characters)
FlexSet 120S/121S) 3 rows x 24 ch.
3rd line is controlled by FlexSet software
3 DSP80 FlexSet 280D & 280D-Z (2 rows x 40 ch.)
FlexSet-IP 280S, FlexSet 280S/281S (3 rows x 40 ch.)
3rd line is controlled by FlexSet software
GKT/FlexSet 80 (Graphic Display)
6 DSP72 FlexSet 120S/121S (3 rows x 24 characters)
3rd line is controlled by main Coral software
7 DSP120 FlexSet 280S/281S (3 rows x 40 characters)
3rd line is controlled by main Coral software