Tadiran Telecom FlexSet 280, Руководство пользователя

Страница: 18 / 132

1-6
Coral Terminal Equipment
Fl
ex
Set
In
stall
ation
1
To Connect the FlexSet to a Standard Wall Socket
1. Turn the telephone onto its back. There is a connector socket located on the lower
third of the telephone at the center, marked
LINE
(see
Figure 1-3
and
Figure 1-4
).
Place either end of the telephone line cord into this socket. The cord comes with
the same connector type on both ends.
The connector will fit properly in one direction only. If the connector does not go
into the socket easily, turn the connector over and retry.
Figure 1-3 FlexSet
280/281 Bottom View
Figure 1-4 FlexSet
120/121 Bottom View
3 Installing the FlexSet
Handset
x
Screw
Plastic
Base Cover
LINE
Handset
LINE