Tadiran Telecom Coral IPx 500, Руководство по установке

Страница: 71 / 544

Hardware Installation Procedure
2-29
Eq
uip
m
ent Insta
lla
tio
n
2
0
The process of mounting and installing the rack mounted cage includes the following:
„ Unpacking the Shipping Container, on page 2-29
„
Checking the Space and Positioning Requirements, on page 2-31
„
Removing the Cage Door and Top Cover, on page 2-31
„
Preparing the cage for one of the following configurations:
a.
Preparing the Cage for 19" Rack-Mounted Configuration, on page 2-31
b.
Preparing the Cage for 23" Rack-Mounted Configuration, on page 2-32
„
Mounting the Cage onto the Rack, on page 2-33
Unpacking the Shipping Container
1.
Inspect the shipping container for evidence of physical damage or mishandling.
Report any damage to the carrier immediately.
2.
If it is necessary to make a damage claim to the carrier, do not move the container
until it has been examined by a representative of the carrier. Otherwise, before
opening, move the container as close as possible to the installation area.
3. Using a utility knife, carefully cut the tape securing the top flaps of the container
and open the flaps.
4. Remove any parts in the depressions of the top foam insert.
5. Remove the top foam insert and set aside.
6. Using an assistant to prevent personal injury, grasp the ends of the cage and lift it
out of the container. Place the cage on a stable surface.
7. Inspect the cage covers for shipping damage.
8. Check the parts list and verify that all the items are present.
Table 2-6
lists some of
the components that are supplied with the Rack-mounted Coral IPx 500 system.
9. Remove any other cage items from the shipping container, and move the container
so that it does not interfere with the remaining installation procedures.
3 Rack Mounted Installations