Tadiran Telecom Coral IPx 500, Руководство по установке

Страница: 51 / 544

Hardware Installation Procedure
2-9
Site Inspection
2
Space Above and Below the IPx 500 Cage
The Coral IPx 500 cage requires a minimum space of 2U (3.5" or 9cm) above the top
cover in order to allow space for maintenance purposes (that is, adequate space for
opening the top cover and routing the cables via the rear slots). A minimum space of
1U (1.75" or 4.5cm) must be maintained to allow cool ambient air to reach the
perforations at the bottom panel. See
Figure 2-3
.
The minimum spaces specified in Figure 2-3 do not take into consideration
heat transfer from other equipment to the Coral IPx 500. If other heat
dissipating equipment is installed above or below the Coral IPx 500 cages,
you will need to increase the space.
Figure 2-3 Coral IPx 500
Space Required Above
and Below the Cage
Space between the Wall Mounted Cage and the MDFipx
You can order an MDFipx unit from the manufacturer. If the MDFipx unit is to be
positioned 2.5” (5cm) from the right panel of the cage, you can order an MDFipx unit
with the cables already attached. Otherwise, you need to order an MDFipx unit
without cables.
Figure 2-4
displays the space between the Coral IPx 500 cage and the MDFipx.
Figure 2-4 Coral IPx 500
Space Required Between
the Cage and the MDFipx
2U (9.0 cm) 3.50"
1U (4.5 cm) 1.75"
IPx 500
Cage
(5 cm) max. 2"
IPx 500
Cage
MDFipx
Unit