DXF-200 Getting Started Guide
Page 35
7
The sample holder fits 1/2” (12.7 mm) O.D. samples. If there are screws in the four corners of the sample
holder, remove them. If using 1” (25.4 mm) O.D. samples, remove the sample holder.
Figure 17
1/2” (12.7 mm) O.D. sample holder cover.
8
With tweezers, carefully place the sample into the sample holder.
Figure 18
Loading the sample (left); Sample loaded (right).
9
Screw the sample holder cover back into place.
Figure 19
Cover back in place.
