DXF-200 Getting Started Guide
Page 13
Table 3:
DXF Front Panel Switches
Indicator
Function
HARDWARE ENABLE
When prompted by the operating software, this switch is
pressed to enable the operation of the electronic hardware. If
all the electronic checks are correct, the switch's integrated
green LED will light up.
ON INTERLOCK
When prompted by the operating software, this switch is
pressed to enable the temperature control of the furnace. If all
the electronic checks are correct, the switch's integrated green
LED will light up.
OFF INTERLOCK
At any time, this switch is pressed to disable the temperature
control of the furnace. The switch's integrated red LED does
not light up. When the switch is pressed, if the ON interlock
LED is enabled, it will be disabled.
INDEX ON
This switch is not used.