WARNING!
Risk of injury due to falling or toppling trans-
port sections!
Transport sections may not have a centralised
centre of gravity. If fastened incorrectly, the
package can topple and fall. Falling or toppling
transport sections can cause serious injuries.
–
When using a crane to move the sections,
fasten the crane hook in such a way that it is
positioned above the centre of gravity of the
unit.
–
Move the forks of the forklift under the
transport section in such a manner that it
cannot tip over.
–
Align the means of transport (rope spreaders
and upper lifting beams) to the centre of gravity
for a balanced load distribution.
–
Lift the transport sections carefully. If they start
to tilt, then stop the lift and change the fas-
tening.
CAUTION!
Sharp edges, pointed corners and thin-walled
sheet metal parts!
Sharp edges, pointed corners and thin-walled
sheet metal parts on the device components can
cause abrasions and cuts into the skin.
–
Proceed with caution when working in the
vicinity of sharp edges, pointed corners and
thin-walled sheet metal parts.
–
Wear safety gloves, protective clothing, safety
shoes and industrial safety helmets.
ENVIRONMENT!
Incorrect disposal poses a risk to the environ-
ment.
Incorrect disposal can cause environmental haz-
ards.
–
Ensure that all electrical scrap, electronic com-
ponents, coolants, refrigerants, oil from the
refrigeration cycle, brine, glycol and lubricants
are disposed of by approved specialist disposal
companies.
Off-centre centre of gravity
Sharp edges, pointed corners and
thin-walled sheet metal parts
Incorrect disposal
Safety during the dismantling and disposal
25.08.2022
Device type: Menerga TX - ThermoCond
48