SystemAir menerga TX Скачать руководство пользователя

Страница: 3 / 52

This transport and assembly manual enables you to handle the

air-conditioning and water-handling device safely and efficiently

(hereinafter referred to as the device).

The transport and assembly manual is an integral part of the

device and must be kept close to the unit and be accessible for

staff at all times.

The staff must have carefully read through and understood this

transport and assembly manual before starting any work. Adher-

ence to all the safety information and instructions specified in this

transport and assembly manual is a basic prerequisite in order to

ensure safety whilst working.

The local regulations for the prevention of accidents and general

safety rules for operational area of the device also apply.

The illustrations in this transport and assembly manual are for the

purpose of basic understanding and may differ from the actual

device delivered.

This manual is protected by copyright and intended exclusively for

use with the device.

The transfer of these instruction to third parties, duplication of

any type and form - including excerpts -, and the exploitation

and/or communication of the contents are prohibited without written

approval from Menerga GmbH except for internal purposes.

Any infringement will render the offender liable for compensation.

All the information and instructions in this manual have been com-

piled with the utmost care, taking into account the applicable stand-

ards and regulations, state-of-the-art technology and our years of

knowledge and experience.

The manufacturer assumes no liability for damages caused by:

Failure to adhere to these instructions

Improper use

Use of unqualified staff

Failure to adhere to the recognised rules of technology

Unauthorised alterations

Technical modifications to the device

The obligations agreed in the contract of supply, the general terms

and conditions of business, the manufacturer's terms and condi-

tions of supply and the legal regulations valid at the time of com-

pletion of the contract apply.

Scope

Copyright

Limitation of liability

Supplemental directives

25.08.2022

Device type: Menerga TX - ThermoCond

Содержание menerga TX





















































Результаты поиска

Содержание menerga TX

Отзывы:

Похожие инструкции для menerga TX

Бренды по названию

Популярные бренды

SystemAir menerga TX, Инструкция по сборке

Результаты поиска

Содержание menerga TX

Отзывы:

Похожие инструкции для menerga TX

Бренды по названию

Популярные бренды