NOTICE!
Damage to property due to the mechanical load
of the insulation cover
The insulation covers that can optionally be
attached to the cubes may be damaged by
mechanical loads during transport.
–
Proceed carefully when transporting the cubes.
2.2.2 Transport by means of fork-lift trucks
The transport sections can be transported on wooden pallets or
with the marked lifting points in the device base. Here, only the
marked lifting points may be used for the transport. For transport
sections with feet and without marked lifting points, the forks of the
fork-lift truck must be set below the unit base.
n
‘Transport on a wooden pallet’ on page 19
n
‘Transport using lifting points’ on page 20
Personnel:
n
Fork-lift driver
Protective equip-
ment:
n
Hard hat
n
Safety shoes
n
Safety gloves
n
Ear protection
n
Occupational safety clothing (Personal
Protection Equipment - PPE)
The dimensions, weights and labelling of transport sections can be
taken from the unit drawing.
The unit drawing is fixed to the outside of the transport section
of the unit and can also be found in the operating manual; see
example
Chapter 2.1.1 ‘Type of packaging’ on page 13
WARNING!
Risk of injury due to swinging control cabinet!
The pivoting of the control cabinet can cause
serious injuries and significant property damages.
1.
For transport sections with assembled pivoting control cab-
inet, secure the control cabinet with tension belts.
Mechanical load of the insulation
cover
Transport on a wooden pallet
Transporting the transport sections > Transport by means of fork-lift trucks
25.08.2022
Device type: Menerga TX - ThermoCond
19
