manualshive.com logo in svg

SystemAir menerga TX, Инструкция по сборке

Поделиться
Скачать
SystemAir menerga TX Скачать руководство пользователя страница 12

Occupational safety clothing (Personal Protection Equipment

- PPE)

Occupational safety clothing is close-fitting working clothing with

low resistance to tearing, with close-fitting sleeves and no pro-

truding parts.

Protective goggles

The protective goggles are used to protect the eyes from flying

parts and liquid splashes.

Safety gloves

Wear protective gloves to protect your hands from rubbing, abra-

sions, cuts or more severe injuries as well as before touching hot

or cold surfaces.

Safety harness

To reduce risk of falling a safety harness must be used. When cer-

tain heights are exceeded and the working location is not secured

by a railing a safety harness must be worn.

Fit the safety harness so that the safety rope is connected securely

to the fastening points. A shock absorber may also be fitted.

Safety harnesses must only be used by personnel with special

training.

Safety shoes

Safety shoes protect the feet against crushing, falling objects and

slipping on slippery surfaces.

Personal safety equipment and clothing 

25.08.2022

Device type: Menerga TX - ThermoCond

12

Содержание menerga TX





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды