manualshive.com logo in svg

SystemAir menerga TX, Инструкция по сборке

Поделиться
Скачать
SystemAir menerga TX Скачать руководство пользователя страница 24

2.4  Unpacking transport sections

WARNING!
Risk of injury due to pivoting control cabinet!

The control cabinet is only held onto the device

by the packaging and the protective film. When

removing the packaging and the protective foil, the

control cabinet could swing out and cause serious

injuries and significant property damage.

–

Ensure you properly secure the control cabinet

before removing the packaging and the protec-

tive film.

Remove the packaging from the transport units and packages.

ENVIRONMENT!
Incorrect disposal poses a risk to the environ-

ment.

Packaging materials can be processed and recy-

cled in many cases. Incorrect disposal of packing

materials can cause environmental hazards.

–

Dispose of packaging materials responsibly, in

accordance with the local disposal regulations.

–

Optionally, commission a specialist company

for the disposal.

Pivoting control cabinet

Removing packaging

Incorrect disposal

Unpacking transport sections 

25.08.2022

Device type: Menerga TX - ThermoCond

24

Содержание menerga TX





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды