SystemAir AquaScop HT V2, Руководство по установке и обслуживанию

Страница: 32 / 84

English
PROG
Main screens P1

P4
Screen Reference
INSTALLATION MENU
ENTER
Power on screen
ESC
INSTALLATION MENU
MAIN MENU MP
ON/OFF-SUM/WIN O0
HEAT CURVE L1

L4
DOMESTIC HOT WATER
ES0

ES10
ROOM TERMINAL TH0

TH3
ALARM LOG H1

H2
OPERATING TIME TM1

TM2
Screen Reference
Password
NEW PASSWORD
MANUAL OUPUTS
MANUAL DEICING
COMPRESSOR MNGT
MAINTENANCE
INSTALLATION CONFIG
DUAL ZONE
BOILER RELIEF
ELECTRIC HEATER
IE1

IE7 DOMESTIC HOT WATER
WATER SETPOINT
WATER PUMP
MI
ENTER ENTER
ENTER
BOILER RELIEF
R0

R1
30 Aqu@Scop HT V2
The Aqu@ Scop HT controller manages domestic hot water production in accordance with the following
operating modes:
²
PERMANENT COMFORT MODE
Domestic hot water production has priority over heating except when the ambiance temperature /
set temperature difference is greater than 2° C (Maximum one hour).
Example: Set temperature = 20°C, Ambience < 18°C
²
ECONOMY MODE
Domestic hot water is produced during off-peak hours (dry contact) or in accordance with times
programmed in the controller.
Option: Possibility to restart domestic hot water production outside off-peak hours if the water
temperature has reached a programmable minimum temperature.
²
IMMEDIATE DOMESTIC HOT WATER PRODUCTION
The Aqu@ Scop HT 's regulator enables domestic hot water production to be forced as required. At
the end of the cycle, the system returns to its usual operating mode.
15.2. DOMESTIC HOT WATER PRODUCTION MODES
15.3. DOMESTIC HOT WATER HEATING FUNCTION ACTIVATION
The Legionnaires' Disease protection treatment managed by the Aqu@ Scop HT 's controller is fully
programmable (frequency, temperature threshold, treatment length).
The PERMANENT COMFORT and ECONOMY modes place priority on thermodynamic heating. In the event of
excessive demand for Domestic Hot Water Temperature that does not permit the compressor(s) to operate,
the backup electric heating function is activated. In order to achieve energy savings, it is important to use
the lowest possible set temperature points.
We recommend:
Eco set temperature < Comfort set temperature < 53°C