6
DePuy Synthes
Air Power Line II Instructions for Use
Introduction
Startup of the
Air Power Line system
Removing the compressed air hose
Disconnect the hose by pulling back the hose coupling
sleeve.
Remove the air hose from the compressed air or nitrogen
source.
Precaution:
The air hose has to be connected properly and
should never be squeezed or obstructed by any loads.
Non-respect might lead to bursting of the outer hose.
Connecting the compressed air hose to the handpiece
Attach the hose coupling over the air inlet nipple on the unit
up to the stop. The coupling will lock by itself with an
audible click.
Attach the other end of the air hose to the compressed air or
nitrogen source. Ensure that the coupling geometry of the
air hose is compatible with the geometry of the wall cou-
pling.
If the operating room does not have an exhaust air system
then use the Air Diffusor (519.950) to diffuse the air. The Air
Diffusor is connected between the source and the air hose.
