16
DePuy Synthes
Air Power Line II Instructions for Use
Air Reamer/Drill II
Figure 1
Radiolucent Drive (511.300)
Inserting the drill
Pull the ring on the attachment forward, and push the drill
into the coupling as far as it can go while rotating it slightly
(Fig. 1). Push the ring on the attachment back to fi x the drill.
Check if the drill is seated correctly by gently pulling on it.
For removal, follow the same procedure in reverse.
Coupling the Radiolucent Drive to the power tool
Attach the Adapter for Radiolucent Drive (530.741) to the Air
Reamer/Drill II (for information please refer to page 9,
Mounting the attachments). Push the Radiolucent Drive as
far as it will go over the quick coupling and the adapter, and
rotate it into the desired working position. Support the drive
with your free hand.
For removal, follow the same procedure in reverse.
Adapter for Radiolucent Drive (530.741)
