14
DePuy Synthes
Air Power Line II Instructions for Use
Drill Chuck (530.731)
Drill Chuck (530.732)
Spare key (510.191)
Drill Chuck (530.730)
Air Reamer/Drill II
Drill Chuck with key (530.732)
(Speed: 0–340 rpm)
Accept round and triangular shafts up to
B
7.3 mm
Loading tools into the chuck
Drill chuck with key (530.730, 530.732)
Open the clamps of the drill chuck with the key provided
(510.191): Insert the key into the suitable shaft and turn anti-
clockwise. Insert the shaft of the tool into the centre of the
opened chuck.
Close the chuck in reverse order.
Ensure that the shaft of the tool is fi tted between the centre
of the three clamps of the chuck. Turn the key clockwise to
tighten. The teeth of the key must be properly seated in the
gear of the drill chuck. The teeth of the chuck and of the key
must not be worn.
Drill Chuck, keyless (530.731)
Open the clamps manually be holding the retaining ring and
turning the securing ring clockwise. Insert the shaft of the
tool into the centre of the opened chuck. Lock and tighten
the chuck by holding the retaining ring and turning the
securing ring clockwise. Ensure that the shaft of the tool is
loaded between the centre of the three clamps of the chuck.
Drill Chuck with key (530.730)
(Speed: 0–930 rpm)
Drill Chuck, keyless (530.731)
(Speed: 0–930 rpm)
