Synectix ATT 2000, Руководство пользователя

Страница: 44 / 56

Enter 509 n where n = 03 to 99
Default value = 05
Length of entry = fixed 2 digit
If 00 or 01 or 02 is entered, the unit prompts the message “This entry is
invalid”.
Program # 609:
To listen to the currently programmed value for the Number of rings for
Operator to pick up -
You will hear:
“Six Zero Nine (0.6 sec silence) Zero Five “
Program # 510: Operator Transfer digit
It is possible to program the Operator transfer digit to any value between 0
and 9. However, the Operator Digit may not be part of the Single Digit
Dialing Plan.
Enter 510 n where n = 0 to 9
Default value = 0
Length of entry = fixed 1 digit
Program # 610:
To listen to the currently programmed value for the Operator transfer
digit -
You will hear:
“Six One Zero (0.6 sec silence) Zero“
Program # 511: Overflow Relay Pick up
The ATT 2000 has an optional provision for the incoming call to be picked
up through the Overflow Relay. When an incoming call goes unanswered
at the Operator Console, the PBX may be programmed to activate the
Overflow relay. These relay contacts may be wired to the Overflow Relay
input of the ATT 2000.
When the Overflow relay closes and opens its contacts a pre-defined
number of times, the ATT 2000 goes off hook and dials the pick up code -
(now the PBX connects the incoming call to the ATT 2000) - and then starts
playing the main greeting. The caller then has all the options available
through the ATT 2000.
Default value: 511 5
Þ 67
44