Synectix ATT 2000, Руководство пользователя

Страница: 50 / 56

enter 518 1.
Length of entry = fixed 1 digit
If any value other than 0 or 1 is entered, the unit prompts the message
“This entry is invalid”.
Program # 618:
To listen to the currently programmed value for the Action on No digit
response -
You will hear:
“Six One Eight (0.6 sec silence) Zero“
Program # 519: Announcer Mode
The ATT 2000 may be programmed to work as a Recorded Message
Announcer where the unit answers the incoming call, plays the recorded
message and disconnects the call. This type of functioning may be useful
when the office has shifted its premises or is closed for renovation or is
closed for holidays etc. when there is nobody to answer the incoming calls.
Enter 519 n where n = 0 or 1
Default value = 0 (Normal mode). To enable the Announcer mode of
operation, enter 519 1.
Length of entry = fixed 1 digit
If any value other than 0 or 1 is entered, the unit prompts the message
“This entry is invalid”.
Note: In the “Announcer mode” of operation, the DAY greeting is played
back irrespective of the Night & Holiday programming and Fax detection is
disabled.
Program # 619:
To listen to the currently programmed value for the Announcer mode -
You will hear:
“Six One Nine (0.6 sec silence) Zero“
Program # 520: Change Installer Password
The Installer is allowed to have a 5 digit password as against a 4 digit
password for the end user. To program a new 5 digit password -
Enter 520 nnnnn.
`nnnnn' is the new password that you want to set. The password may
include Þ but not # as a digit.
50