Program # 110:
Delete Invalid Extension
To delete one or all of the Invalid extensions -
Enter the extension to be deleted after the program number. For example -
110 245 - deletes extension 245 from the list of Invalid extensions.
If that extension is not present in the list of Invalid Extensions, you will hear
the message “This entry is invalid” and the unit returns to the “Enter
Program number” prompt.
To delete all Invalid extensions -
Enter 110 00000. (Five zeros must be entered)
Program # 210:
This program also prompts the Invalid list of extensions. (Same as program
# 209)
Program # 111:
Rings for No Answer
Number of rings to wait before deciding there is NO ANSWER from that
extension:
When an incoming call is transferred to an extension in the fully supervised
mode, the unit waits to see if that extension is answered or not. If the
extension returns a ring signal, the unit waits for the programmed number
of rings before deciding that there is “no answer” at that extension.
The ring signal has a very specific cadence and any response not matching
the ringing sequence of that PBX are taken as answered and the caller is
connected to that extension.
Enter 111 n where n = 3 to 9
For all other digits, the unit prompts the message “This entry is invalid”.
Default value = 5
Length of entry = fixed 1 digit
The unit counts the number of rings returned by the called extension and
if this exceeds the programmed value, the unit retrieves the call and plays
the prompt “I am sorry, there is no answer from that extension”. The call is
treated as answered if the call progress cadence returned by the called
extension does not match the programmed Ring cadence.
Program # 211:
To listen to the value for the Number of rings for No Answer
You will hear: “Two One One (0.6 sec silence) Five”
Program # 112:
Re-route on Busy Extension
If an extension to which a caller requests a transfer returns a busy signal,
the caller hears the prompt “I am sorry, that extension is busy. Please dial 0
for an Operator or try your call later.” Now if the caller dials 0, the call is
21
Содержание ATT 2000
Страница 1: ......
