Synectix ATT 2000, Руководство пользователя

Страница: 17 / 56

extension and hangs up. The unit performs a ‘no answer’ check on the
operator extensions if a Fully supervised mode has been selected. The
actual mode of transfer must be set by your Installer at the time of
installation separately for the Operator extensions.
Default value = 104 0
#
Length of entry = maximum of 16 digits, including the # key
The # key is used to terminate the entry sequence. If a
Þ
is entered as the
first digit or if two consecutive
Þ
s are entered anywhere else in the string,
the system treats it as an invalid entry.
If 16 digits are entered and then the
# key is pressed, the unit checks for
validity of the 16 digits and then stores them if valid. But the # key is
processed as the first digit of the next program number - which will make
the unit exit the programming mode. Hence, the # key must be used only
if the total number of digits entered is less than 16.
Program # 204:
To listen to the currently programmed value for the Operator extensions -
You will hear:
“Two zero four (0.6 sec silence) Zero”
The
# at the end is not prompted as it is an indicator of the end of the
string.
Program # 105: Fax Extensions
The user may program multiple extensions as “Fax extensions”. These
extensions may be of different lengths. For example, you may enter 105
200 Þ 5001 # . To disable the fax detection, enter # as the first character.
Press Þ to separate two extensions. Press # to terminate the entry. For
example, the entry 105 1 # is valid.
When a call is routed to the ATT 2000, it goes off hook and starts playing
the DAY / NIGHT / HOLIDAY greeting normally. As soon as the Fax tone is
detected, it stops playing the greeting and transfers to the Fax extension.
This feature allows the caller to listen to the greeting (to confirm that he
has called the correct number) and then press the START button on his fax
machine. The automatic transfer to the fax extension takes place as long as
the fax tone is detected before the greeting finishes playing.
If the unit encounters a Busy or No-answer signal from the first extension, it
tries the second and if even that is Busy / No-answer, it tries the third
extension in the list. If all the extensions are Busy / No-answer, the call is
transferred to the Operator, so that the fax call may be attended to
manually, if possible.
17