Outgoing Calls
58
Synapse SB67030/031 Deskset and Accessories User’s Guide
Making an Intercom Call (Line Appearance Mode)
In Line Appearance mode, your Deskset uses an outside line any time you go off hook by lifting the handset, pressing
SPEAKER
,
or by some other method. To make an internal (extension-to-extension) call, you must use the Intercom key. By default, key 5 is
the Intercom key, but your system administrator can configure additional Intercom keys to give you more Intercom lines.
To make an intercom call:
Figure 39. Making an Intercom Call
Figure 40. Active Intercom Call
1. With the Deskset in Idle mode and the handset “on hook,” do one of the
following:
Press the
INTERCOM
key, lift the handset (the screen shown in
Figure 39 appears) then dial the extension number.
Instead of dialing after lifting the handset, you can press the
soft
key, highlight the desired extension number, then press
SELECT
to dial
the number.
Dial the extension number, then press the
INTERCOM
key.
The Deskset dials the extension in Speakerphone mode. To continue the
call using the handset, pick up the handset.
When your Intercom call is answered, the Active Call screen appears, as
shown in Figure 40.
