
Troubleshooting
243
Synapse SB67030/031 Deskset and Accessories User’s Guide
To restore a Deskset to factory defaults:
To restore a Deskset to factory defaults, insert a pen or paper clip into the hole on the back of the Deskset and press the
RESET
button for more than five seconds.
To resolve problems with a cordless device:
For features or audio problems, make sure that the Deskset associated with the cordless device does not share the problem.
If it does, look in Deskset Troubleshooting. See
“Other Deskset Features” on page 257
.
1. Verify that the device battery has power.
When removed from the charger, the Handset screen is lit for about 30 seconds.
When removed from the charger, the Headset emits a dial tone or three beeps when you press
ON
/
OFF
.
If there is no power, see the Handset or Headset installation sections of the Synapse Installation Guide at
www.telephones.att.com/synapseguides
2. Verify that the Deskset
Cordless Settings
screen indicates that the device is registered.
Press
MENU
–>
2
–>
6
.
If the Handset is not registered, register it:
a. Place the Handset in the charger.
b. Register the Handset at the Deskset. Press
MENU
–>
2
–>
6
–>
1
–>
.
If the Headset is not registered, register it:
a. Place the Headset in the charger.
b. Register the Headset at the Deskset. Press
MENU
–>
2
–>
6
–>
2
–>
(Call Appearance mode), or
MENU
–>
2
–>
3
–>
2
–>
(Line Appearance mode).