SWM SM 125 R 2020, Быстрое руководство, Страница: 50 / 162

OUTLAW 125
16 / EN
TRIP SETTINGS
Press the “Set” key (1) until “TRIP” appears and
then press the button (1) for more than 3
seconds to reset the value and return the count
to 0 km or miles.
UNIT OF MEASURE SETTINGS
The unit of measure must be set with the
motorcycle stopped and key in the ON position.
Press the “Set” key (1) until “ODO” appears and
then press the button (1) for more than 3
seconds to switch from km to miles or vice versa.
ERROR MESSAGES
In the event of a fault, the relevant error code is
displayed on the display (1); see the closes SWM
dealer to check the fault.
Operate as shown for the following error codes.
1
1
1
System or Component DTC Number DTC Description Related Calibration
Manifold Absolute Pressure Sensor (MAP) P0107 MAP Circuit Low Voltage or Open KsDGDM_MAP_ShortLow
P0108 MAP Circuit High Voltage KsDGDM_MAP_ShortHigh
Intake Air Temperature Sensor (IAT) P0112 IAT Circuit Low Voltage KsDGDM_IAT_ShortLow
P0113 IAT Circuit High Voltage or Open KsDGDM_IAT_ShortHigh
Coolant/Oil Sensor P0117 Coolant/Oil Temperature Sensor Circuit Low Voltage KsDGDM_CoolantShortLow
P0118 Coolant/Oil Temperature Sensor Circuit High Voltage or Open KsDGDM_CoolantShortHigh
Throttle Position Sensor (TPS) P0122 TPS Circuit Low Voltage or Open KsDGDM_TPS_ShortLow
P0123 TPS Circuit High Voltage KsDGDM_TPS_ShortHigh
Oxygen Sensor P0131 O2S 1 Circuit Low Voltage KsDGDM_O2_1_ShortLow
P0132 O2S 1 Circuit High Voltage KsDGDM_O2_1_ShortHigh
Oxygen Sensor Heater P0032 O2S Heater Circuit High Voltage KsDGDM_O2_1_HeaterShortHigh
P0031 O2S Heater Circuit Low Voltage KsDGDM_O2_1_HeaterShortLow
Fuel Injector P0201 Injector 1 Circuit Malfunction KsDGDM_INJ_CYL_A_Fault
P0202 Injector 2 Circuit Malfunction KsDGDM_INJ_CYL_B_Fault
Fuel Pump Relay (FPR) P0230 FPR Coil Circuit Low Voltage or Open FPR KsDGDM_FPP_CircuitShortLow