SWM SM 125 R 2020, Быстрое руководство, Страница: 48 / 162

OUTLAW 125
14 / EN
COMBINED INSTRUMENT
The motorcycle is equipped with a combined
instrument divided into the following areas:
1) Signal lights (see “Warning and signal lights”)
2) Multifunction display (see “Multifunction
Display”)
3) Tachometer
Indicates engine rpm.
Maintain the engine speed within 11500 rpm.
WARNING*: The motor can be ruined by
exceeding 11500 rpm.
4) “SET” key
Let’s you view the various multifunction
display functions, change unit of measure, reset
some values and set the clock (see
“Multifunction display”).
Press the button to switch from one function
to another.
WARNING AND SIGNALLING LIGHTS
1)
Left direction indicator light.
2) Right direction indicator light
3) High-beam light.
4) Neutral warning light.
5) Engine failure warning light.
6) Fuel reserve warning light.
7) Excessive coolant temperature indicator
DIRECTION INDICATOR LIGHTS “ ”
The light
fl
ashes when activating the left or right
hand turning indicator using the control lever on
the left-hand switch.
HIGH-BEAM LIGHT “ ”
The light comes on when activating the high-
beam light using the control on the left-hand
switch.
3
4
1
2
2
4
3
1
5 6
7
NEUTRAL WARNING LIGHT“ ”
The light comes on when the gear shift lever is in
neutral position (no gear engaged).
ENGINE FAILURE WARNING LIGHT“ ”
When the ignition key is turned, the engine
control unit runs a self-test, the light comes on
for a few seconds and then goes o ff if no fault is
found
If the light comes on while the engine is running,
it means that there is an engine or injection
system failure.
- Stop and turn o ff the engine.
- Wait a few minutes and restart the engine; if
the light comes on again, contact your nearest
SWM dealer to have the self-test system
checked.
FUEL RESERVE WARNING LIGHT“ ”
when the ignition key is turned, the light comes
on for a few seconds and then goes o ff . If the
light comes on while riding the motorcycle, it
means that the fuel has gone into reserve (3
litres) and you need to refuel as soon as
possible.
EXCESSIVE COOLANT TEMPERATURE
INDICATOR.
“
”
The indicator lighting up warns that the engine
overheated reaching an alarm temperature.
- Stop and turn off the engine;
- Wait for the engine to cool down and then
restart the engine.
If the problem occurs again, it is necessary to
refer to the nearest SWM’s dealer for a check.
MULTIFUNCTION DISPLAY
1) Speedometer
Indicates motorcycle speed.
2) Speed scale indication:
Km/h = kilometres/hour
Mph = miles/hour
3) Display parameters
The following parameters that will be displayed
in the field (4) can be individually set in this field.
ODO = Odometer (read-only value)
TRIP = Partial odometer (see TRIP settings)
5) Unit of measurement
Mile = indicates that the valued indicated in the
ODO and TRIP functions is in miles
Km = indicates that the valued indicated in the
ODO and TRIP functions is in kilometres
6) Engine cooling water temperature indicator.
1
2
4
3
5
6