Swissvoice Eurit 535, Руководство пользователя, Страница: 57 / 102

203245631en_ba_b0
53
Using several handsets
Logging a handset onto another
base station (GAP)
To log your handset onto a third-party base
station (other base station), the handset
must support the GAP generic access
profile.
Follow the manufacturer’s instructions
when preparing the other base station for
log on.
Prepare the handset:
1. Enter the 4-8 digit access code (AC)
of the previously prepared base
station (e.g. 12345).
2. Press
OK
.
3. Key in the designation of the base
station (A–D).
4. Press
OK
.
5. Press
YES
.
Note:
The base station assigns the internal
number for the handset automatically.
The base station letter (e.g. A) appears in
the display to confirm that log on was
successful.
If log on was unsuccessful, an error tone
sounds and the letter A flashes.
GAP functions are described in the section
"GAP uses".
BaseStat. setting
Log on
On other system
Logging another handset onto
the base station (GAP)
A third-party handset (other handset) must
support the GAP generic access profile in
order to be logged onto your base station.
Prepare the base station using the handset:
1. Specify a 4 to 8 digit access code
(AC), (e.g. 12345).
2. Press
OK
.
3. Key in the new internal number (1–
6) of the other handset.
4. Press
YES
.
5. Log the other handset on according
to its instructions.
Note:
If the internal number used has previously
been allocated for logging on, the handset
first logged on will be logged off.
BaseStat. setting
Log on
Other handset