Svantek SV 973, Руководство пользователя

Страница: 16 / 212

SVAN 973 User Manual 16
The following control keys are located on the front panel of the
instrument:
•
<ESC>
•
<Enter>
•
▲
,
◄
,
►
,
▼
•
<Shift>
•
<Start/Stop>
The action given in (...) brackets denotes the second key function
which is available after pressing it in conjunction (or in sequence)
with the
<Shift> key.
<Shift> The second function of a key can be used when the <Shift> key is pressed with
<ESC> or arrow keys. This key can be used in two different modes, which can be
configured in the Keyboard screen ( path: <Menu> / Instrument / Keyboard ):
•
like in a computer keyboard, when both <Shift> and the second key must be
pressed simultaneously ( Direct mode);
•
like in a smartphone keyboard, when the first <Shift> key should be pressed
and released and then the second key pressed ( 2nd Function mode).
Note: Simultaneous pressing of the <Shift> and <Start/Stop> keys turning the instrument on
or off.
<Start/Stop> This key allows you to start and stop a measurement process.
<Enter> This key allows you to open the selected position on the Menu list, to confirm selected
settings or to switch the sub-views in the measurement mode. Some additional
functions of this key will be described in the following chapters of this manual.
<ESC> This key closes lists of parameters or other screens and return to the upper list of the
menu. It acts in an opposite way to the
<Enter> key. When a screen is closed after
pressing the <ESC> key, any changes just made are ignored.
In the Measurement mode, this key switches results presentation views.
<Shift>+<ESC> This combination of keys allows you to pause or break the measurement process
temporarily. If there is no current running measurement in progress this key opens the
Setup Manager menu.
◄
/
►
These keys allow you, in particular, to:
•
change viewed result in the measurement mode,
•
select column in a multi-column parameter list,
•
select parameter value in an active position (e.g. filter Z , A , C ; integration period:
1s , 2s , 3s
, … etc.),
•
control cursor in the Logger , Statistics and Spectrum views,
•
select position of a character in the text editor screen,
•
speed up changing of numerical values of the parameters when pressed and held.
(◄
/
►)
These
◄
/
►
keys pressed in together with <Shift> allow you, in particular, to:
•
select parameter value in an active position (e.g. filter Z , A , C ; integration period:
1s , 2s , 3s
, … etc.),
•
shift cursor from the first to the last position and back on the plot.
▲
/
▼
These keys allow you, in particular, to:
•
select position on the list,
•
select correct character in the text editor screen.
(▲
/
▼)
These
▲
/
▼
keys pressed with <Shift> allows you, in particular, to:
•
change view in the measurement mode,