NVR Software - SeeTec Surveillance
62
5.2.1
Adding hardware and saving images
The
Hardware
dialog lists all components presently installed, e.g. cameras, video
servers or input / output devices.
Network cameras consist of a camera unit and a video server unit. For this reason,
the
Hardware
dialog always shows the video server followed by a camera, which is
appended below. Consequently, the settings of a network camera are also listed
separately as video server settings and as camera settings. In the video server
settings, all connection-specific parameters are defined. The camera settings
feature all settings related to image quality and image storage.
Add new hardware component
1. Click on
Hardware
.
2. In the component overview, click on
New
.
3. Enter the name of the hardware component that you want to add.
4. In the
Manufacturer
dropdown list, select the manufacturer of the
hardware component.
5. In the
Type
dropdown list, select the type.
6. Optional: Activate the
Use authorization
checkbox and enter the user
name and password for accessing the hardware component.
7. In the
Host (IP address or name)
field, enter the IP address or the host
name.
8. For distributed installations:
Select the
CameraManagement
server in the CameraManagement server
dropdown list.
9. For distributed installations:
Select the MultimediaDatabase in the
MultimediaDatabase
dropdown list.
10. Confirm with
OK
.
Add new hardware components by using the camera configuration wizard
The camera configuration wizard enables a simplified camera configuration. You can
adapt common configuration settings.
1. Click on
Hardware
.
2. In the component overview, click on
New
.
3. Enter the name of the hardware component that you want to add.
4. In the
Manufacturer
dropdown list, select the manufacturer of the
hardware component.
5. In the
Type
dropdown list, select the type.
