NVR Software - SeeTec Administration
173
6.5
Configure A/V export
To send single images or video sequences in an alarm scenario via e-mail or FTP,
enter the required information under
A/V export
.
Important
Specify the single image and video options in the
Camera
configuration
and in the alarm scenario.
Start the
SeeTec5_AVExport
service on the core server,
otherwise, there will be no export.
6.5.1
Enter a port
1. Enter the
Port
used by the A/V export module (default: 64222).
6.5.2
Using a primary or secondary FTP server
1. In the
Primary FTP server
group box, enter the server address and the
port of the FTP server as well as the user name and password for FTP server
access.
Optionally, the export may be transferred to the FTP server with SSL encryption.
The secondary FTP server is optional. The secondary FTP server is used only when
the primary FTP server is not available.
6.5.3
Select codec
1. Select the
Codec
that will be used for the exported video sequence.
The codec must be locally available. Otherwise, it is not available for selection.
Note
If possible, do not use any Codecs installed by default by Windows
®
.
These codecs lead to low-quality export results.
If different frame rates and resolutions are present in the time
range to be exported (e.g. after a change from standard to alarm
recording) you should check the film sequence because the selected
codec may show a contorted image from the time of change
onwards.
SeeTec recommends the Xvid codec.
