Super Walter W630, Руководство оператора

Страница: 20 / 66

20
Hook up of the planter with the tractor.
For transport purposes.
The planter you have acquired, has a hitch bar designed for towing purposes through roads
or routes.
To proceed to hook up the planter in transportation position, being in a working position, and
with the working bar still hooked up to the tractor, follow the next steps:
1. Remove the hydraulic cylinder depth stops: A shown in figure 9, if they were installed
in the lifting cylinders that is. Lift totally the planter, and place the locks in the
parallelogram installing the pins A and B shown in figure 7
2. Place the locks: A as shown in figure 4 to the markers in a lifted position, with their
pins and locks.
3. Following, release the pressure of the hydraulic system, and remove the hoses from
the quick coupling of the tractor: A in figure 10.
4. Disconnect from the working hitch of the planter from the tractor, Remove pin A as
shown in figure 6, and turn the hitch bar pivoting on pin B until it reaches the frame,
and lock it against the frame with pin C.
Extreme caution when driving with the planter hooked up, especially in roads, and public
spaces.
Be extremely careful when working and performing any type or regulation in the planter,
first is your safety !!! Avoid accidents.
A
A
Figure 9
Figure 10