Sunx SD3-A1, Инструкция по эксплуатации

Страница: 82 / 106

82
11.4.2 Checklist for daily test of mobile applications by responsible operating personnel
If the answer to any of the questions above is No, the vehicle should be checked by a
trained specialist.
1) Are there any problems in the external state of the protective
equipment, the cable, cable connections and any command
devices?
Yes No
2) Are the fastening screws in the mounting system firmly
tightened?
Yes No
3) Are the fastening screws in the SD3-A1 firmly tightened? Yes No
4) Are both protective caps (X1 and X2) screwed on and are the
firmly in place?
Yes No
5) Do the safety equipment and command devices show any
safety-relevant changes or gaps in safety (e.g. by widening the
vehicle)?
Yes No
6) If the protective function of the SD3-A1 is present for all
required monitoring cases (e.g. testing the switch-off function
with a test piece along the detection zone contour, the LED 3 for
SD3-A1 must light up with each attempt and the movement that
poses a danger must be stopped immediately. Possibility of
danger to the person running the test must be excluded)?
Yes No
7) Does the vehicle actually stop within the limits defined by the
responsible specialist (test of switch-off function using a test
piece. Is the possibility of danger to the person running the test
excluded)?
Yes No
8) Is the startup test / restart interlock (if there is one) working? Yes No
9) Do the necessary detection zones match the configuration
protocol?
Yes No
10) If correct functionality is not certain or id the SD3-A1 LED 5 is
flashing, take the vehicle out of operation immediately. Are any
doubts resolved?
Yes No