Sunx SD3-A1, Инструкция по эксплуатации

Страница: 11 / 106

11
Objects (min. 150 × 150mm) are detected up to a distance of 15m (corresponds to the
warning zone) and signaled by way of a non-safety-related semiconductor output.
Eight programmable zone pairs (each of which consists of one detection zone and one
warning zone) enable the scanner to be optimally adapted to the needs of each particular
application.
The SD3-A1 can be implemented not only on machines and systems (stationary
safeguarding of danger zones), but also on vehicles (mobile safeguarding of transport
vehicles).
Due to its wide range of measurement and its non-contact, electro-sensitive
measurement principle, the
SD3-A1 can be effectively used as a protective device for
virtually any application.
2.2 Special features of the SD3-A1
x
Eight freely programmable detection zones (up to a maximum of 4m)
x
Eight freely programmable warning zones (up to a maximum of 15m)
x
Expanded monitoring range of up to 190°
x
ConfigPlug for easy device exchange without configuration expense
x
Compact design (W × D × H: 140mm × 135mm × 155mm)
x
Light weight (2kg)
x
Low power consumption requirements (300mA, plus the load at the outputs)
x
Two types of interfaces at one Sub-D jack (RS-232 and RS-422)
x
User-friendly software