Sunx SD3-A1, Инструкция по эксплуатации

Страница: 21 / 106

21
4.3 Safeguarding of danger points based on hand and arm protection
If the machine operator, in close proximity to the danger zone, needs to halt the
hazardous movement of the machine or to coordinate the handling of workpieces or their
removal from the machine, the machine must be provided with protection at the danger
point. To safeguard danger points in this way a protective system needs to be installed.
The
SD3-A1 is certified as a system providing hand and arm protection, and is able in
such a situation to guarantee flexible safety conditions in the workplace. This may be
combined with alternation of the detection zones. In order to safeguard the protective
equipment, laser scanner and side-mounted panels (which serve as a reference and
provide additional access protection) against inadvertent misadjustment or manipulation,
the detection zones of the
SD3-A1 must be defined on the basis of a reference boundary.
An example of the configuration of the SD3-A1 for the protection of danger points based
on hand and arm protection may be found in Chapter 5.6.
Fig. 4.3-1: Safeguarding of danger points based on hand and arm protection with
alternation of detection zones