54
2.2.2 During storage
Note
When it’s necessary to perform the
rust-preventive operation while the
machine is at indoor, open the doors
and windows to ventilate and prevent
gas poisoning.
During storage, operate the machine to travel,
swing and dig for 2 to 3 cycles at lease once a
month so as to lubricate machine, and charge
the machine battery.
Before operating, check cooling water level
and lubrication status.
Air condition must run once a month.
2.2.3 After storage
Note
Start engine only in well-ventilated
condition.
Remove lubricating grease on piston rod
surface.
Apply grease to all lubricating parts.
Check engine oil level, keep it in specified
level, if not, and refill engine oil. If some water
is found to mix in the oil, replace it.
Check fuel level and bleed the air.
Check its level to ensure that it is with the
standard range.
Start and run the engine at half speed for
several minutes before operation with full load.
Cycle all hydraulic function for several times.
Содержание SWE150F
