SUNWARD SWE150F, Руководство по эксплуатации и техническому обслуживанию

Страница: 139 / 216

132
4.1.7 Checks after inspection and maintenance
Accidents may occur and cause serious injury
or damage, if failed to check after inspection and
maintenance. Follow the steps below to carry out
inspection.

Check after inspection and maintenance( with
engine stopped)

Have any inspection and maintenance points
been forgotten?

Have all inspection and maintenance items
been carried out? Check one by one. .

Have any tools or parts been dropped inside
the machine? It’s particularly dangerous if
parts are dropped inside the machine and get
caught in the link mechanism.

Check for any water and oil leakage. Be sure
all bolts have been tightened at specified
torque
？

Inspection when operating engine.

For any detail information about the checks
when operating engine. Please maintenant it
with two people.

If the inspection and maintenance items work
properly.

Is there any leakage of fuel or oil when engine
speed is raised and applying loads to hydraulic
system.
？
4.1.8 Electrical system maintenance

It is extremely dangerous if the electrical
equipment becomes wet or the covering of the
wiring is damaged. This will cause an
electrical short circuit and may lead to
malfunction of the machine.

Do not use water to flush the inside of
the operator’s cab.

Do not allow water to get into the
electrical components.

Service relating to the electric system is
checking fan belt tension, checking
damage or wear to the fan belt and
checking battery fluid level.

Never install any electric elements other
than those specified by SUNWARD.

When working at seashore, carefully clean
the electric system to prevent corrosion.