SUNWARD SWE150F, Руководство по эксплуатации и техническому обслуживанию

Страница: 179 / 216

172
4.5.7.2 Lubricate swing mechanism
 Stop the machine at level ground, lower the
bucket to ground.
 Stop auto-idle switch, run the engine unloaded
at low speed for 5 minutes.
【Important】

Stopping the engine improperly may
damage turbocharger.
 Set start key to OFF position, stop the engine,
remove the key from starting lock, set safety
lock lever to LOCK position.
 Loosen 2 bolts of grease fill port cover located
on front part of turret. Then remove grease fill
port cover (1).
 Check that grease height in the position where
pinion passes by should be at least 14mm
(0.6in), and free of pollution; add 0.5kg
lubricate grease to reach standard height if
necessary.
 Check the color of the grease, in case of white,
change it.
 Drain port locates around central swing joint
under lower carriage frame.
4.5.7.3 Replace engine oil, oil filter.
For detail, refer to chapter 4.5.2.1.
4.5.7.4 Replace fuel filter
For detail, refer to chapter 4.5.2.3.
4.5.7.5 Replace fuel preliminary filter
For detail, refer to chapter 4.5.2.4.
4.5.7.6 Clean up cooler
For detail, please refer to chapter 4.5.3.2.