SUNWARD SWE150F, Руководство по эксплуатации и техническому обслуживанию

Страница: 57 / 216

50
2.1.6 Unloading
Note

Load the machine only on firm, level
ground and keep a safe distance with
the road shoulder.

Chock the machine to prevent the
machine movement during loading
process.

The ramp for loading must have enough
strength and width with an maximum
slope of 15°, be sure both side of the
ramp is at equal level so that machine
could travel safely.

In case of cold weather, fully warm up
the machine.
Unloading procedure
 Switch off idle speed function, set travel speed
to low speed position, adjust engine throttle
knob to set engine speed at low speed.
 Raise boom to proper height.
 Align the center line of machine track with that
of ramp and travel slowly.
 When machine is over the rear wheels of the
trailer, operate on the machine slowly so that
the machine could transfer to the ramp
smoothly.
 When on the ramp, adjust working equipment
angle so that the angle of boom and arm is
within 90-110°. Lower the bucket to the
ground until the machine leave ramp.