SUNWARD SWE150F, Руководство по эксплуатации и техническому обслуживанию

Страница: 121 / 216

114
3.4.9 Machine traveling
Note

Only if the idler roller is under cab,
the machine moves in the same
direction to the operation of the
travel levers.

When machine is traveling, do not
change traveling direction suddenly
to avoid damages to machine.
 When starting the engine, set idle roller under
cab. Then place safety lock lever to ON
position.
 Fold work equipment, lift boom, and keep the
bucket at a height of 400 to 500mm above
ground level.
 Push travel control lever or step down travel
pedal ： push forward both travel control
lever(or pedal) in sync, the machine will move
forward; pull backward both travel control
lever( or pedal) in sync, the machine will move
in reverse.
 The machine present 2 travel speed stage:
high/low speed, 55km/h and 35km/h
accordingly.
 When the sprocket is located under cab, push
both travel control lever (or pedal) in sync, the
machine will reverse. Pull backward both 2
lever (or pedal), the machine will travel
forward. .
Note：
In real job, should it’s difficult
to identify the relationship between
machine travel direction and joystick
operate direction due to long-time
operation, you may give a trial operation
by handling joystick slightly. With
direction relationship identified, you
are allowed to proceed to operate.