SUNWARD SWE150F, Руководство по эксплуатации и техническому обслуживанию

Страница: 120 / 216

113
Travel operation
 Do not exceed allowed load of the machine to
prevent damages to it.
 When traveling on flat ground, lower work
equipment (bucket) to a height of 400
to500mm above the ground level.
 When traveling on slopes, the work equipment
must be lowered to a height of 20 to 30cm
above. If the slope is steep, the work
equipment must be extended accordingly.
 When travel on slopes or in a confined area,
cancel auto-idle function as well as to set travel
speed at “LOW” position.

Never change direction on slopes or attempt
upper-structure swing operation.
 When passing under bridge, tunnel or other
place with limited height, check to make sure
the machine could pass through. If yes, travel
at low speed.
 When the machine travels on bridge or other
place with load limitation, make sure the
weight of the machine do not exceed load
limits.
 Always keep safety distance, when traveling
under high voltage cables.

Always keep certain distance away from
people, structure and other objects.
 Go pass grassland and marsh at low speed.
 Do not immerse the machine in water by more
than the permissible depth (under center of
sprocket).