Sun Microsystems Sun SPARC Enterprise M3000 Скачать руководство пользователя страница 391

Страница: 391 / 398

Appendix E

Software License Conditions

E-17

----

/*-

* Redistribution and use in source and binary forms, with or without

* modification, are permitted provided that the following conditions are

met:

Redistributions

source

code

must

retain

the

above

notice, this

* list of conditions and the following disclaimer.

* 2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

* 3. All advertising materials mentioning features or use of this software

* must display the following acknowledgement:

* This product includes software developed by the University of

* California, Berkeley and its contributors.

* 4. Neither the name of the University nor the names of its contributors

may

* be used to endorse or promote products derived from this software

* without specific prior written permission.

* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND

* CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED

* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

* PARTICULAR PURPOSE ARE DISCLAIMED.

* IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE

* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

* DAMAGE.

----

Permission to use, copy, modify, and distribute this software for any

purpose and without fee is hereby granted, provided that this copyright

and permission notice appear on all copies and supporting documentation,

the name of Roaring Penguin Software Inc. not be used in advertising or

publicity pertaining to distribution of the programwithout specific prior

permission, and notice be given in supporting documentation that copying

and distribution is by permission of Roaring Penguin Software Inc..

Roaring

Penguin

Software

Inc.

makes

representations

about

the

suitability of this software for any purpose.

It is provided "as is"

without express or implied warranty.

------------------------------------------------------------------------

------

Permission to use, copy, modify, and distribute this software for any

purpose and without fee is hereby granted, provided that this copyright

and permission notice appear on all copies and supporting documentation,

the

name

Lars

Fenneberg

not

used

advertising

publicity

pertaining

distribution

the

program

without

specific

prior

permission, and notice be given in supporting documentation that copying

and distribution is by permission of Lars Fenneberg.

Lars

Fenneberg

makes

representations

about

the

suitability

this

software

for

any

purpose.

provided

"as

is"

without

express

implied warranty.

------------------------------------------------------------------------

-----

Livingston

Enterprises,

Inc.

6920

Koll

Center

Parkway

Pleasanton,

94566

Permission to use, copy, modify, and distribute this software for any

purpose and without fee is hereby granted, provided that this copyright

and permission notice appear on all copies and supporting documentation,

the name of Livingston Enterprises, Inc. not be used in advertising or

publicity pertaining to distribution of the program without specific prior

permission, and notice be given in supporting documentation that copying

and distribution is by permission of Livingston Enterprises, Inc.

Livingston

Enterprises,

Inc.

makes

representations

about

the

suitability of this software for any purpose.

It is provided "as is"

without express or implied warranty.

------------------------------------------------------------------------

------

[C] The Regents of the University of Michigan and Merit Network, Inc. 1992,

Permission to use, copy, modify, and distribute this software and its

documentation for any purpose and without fee is hereby granted, provided

that the above copyright notice and this permission notice appear in all

copies of the software and derivative works or modified versions thereof,

and that both the copyright notice and this permission and disclaimer

notice appear in supporting documentation.

THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS

IMPLIED,

INCLUDING

WITHOUT

LIMITATION

WARRANTIES

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

THE REGENTS OF THE

UNIVERSITY OF MICHIGAN AND MERIT NETWORK, INC. DO NOT WARRANT THAT THE

FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET LICENSEE'S REQUIREMENTS OR

THAT OPERATION WILL BE UNINTERRUPTED OR ERROR FREE.

The Regents of the

University of Michigan and Merit Network, Inc. shall not be liable for any

special, indirect, incidental or consequential damages with respect to any

claim by Licensee or any third party arising from use of the software.

------------------------------------------------------------------------

------

License

copy

and

use

this

software

granted

provided

that

identified as the "RSA Data Security, Inc. MD5 Message-Digest Algorithm"

in all material mentioning or referencing this software or this function.

License is also granted to make and use derivative works provided that

such works are identified as "derived from the RSA Data Security, Inc. MD5

Message-Digest Algorithm" in all material mentioning or referencing the

derived work.

RSA Data Security, Inc. makes no representations concerning either the

merchantability of this software or the suitability of this software for

any particular purpose. It is provided "as is" without express or implied

warranty of any kind.

These

notices

must

retained

any

copies

any

part

this

documentation and/or software.

----

/**********************************************************************

Some individual

* files may be covered by other copyrights.

* This material was originally written and compiled by Wietse Venema at

* Eindhoven University of Technology, The Netherlands, in 1990, 1991,

* 1992, 1993, 1994 and 1995.

* Redistribution and use in source and binary forms are permitted provided

* that this entire copyright notice is duplicated in all such copies.

* This software is provided "as is" and without any expressed or implied

* warranties, including, without limitation, the implied warranties of

* merchantibility and fitness for any particular purpose.

***********************************************************************

----

* Redistribution and use in source and binary forms, with or without

* modification, are permitted provided that the following conditions are

met:

Redistributions

source

code

must

retain

the

above

notice, this

* list of conditions and the following disclaimer.

* 2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

* 3. All advertising materials mentioning features or use of this software

* must display the following acknowledgement:

This

product

includes

software

developed

the

University

California,

* Berkeley and its contributors.

* 4. Neither the name of the University nor the names of its contributors

may

* be used to endorse or promote products derived from this software

* without specific prior written permission.

* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND

* CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED

* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

* REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

Содержание Sun SPARC Enterprise M3000















































































































































































































































































































































































































Результаты поиска

Содержание Sun SPARC Enterprise M3000

Отзывы:

Похожие инструкции для Sun SPARC Enterprise M3000

Бренды по названию

Популярные бренды

Sun Microsystems Sun SPARC Enterprise M3000, Руководство пользователя

Результаты поиска

Содержание Sun SPARC Enterprise M3000

Отзывы:

Похожие инструкции для Sun SPARC Enterprise M3000

Бренды по названию

Популярные бренды