Sun Microsystems Sun SPARC Enterprise M3000, Руководство пользователя

Страница: 260 / 398

5-8 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
5.2.1 Before Logging In
Note the following before attempting to log in:
■
For details on how to create, add, and delete user accounts, see Chapter 2 .
■
After login, if the shell has not been accessed for a certain period, XSCF
automatically terminates the shell. The default timeout period is 10 minutes. The
timeout period can be specified. For details on specifying the timeout period, see
Chapter 2 .
■
In one domain, only one user can use the RW console (write-enabled console).
While one user is using the RW console, another user cannot start another RW
console in the same domain. For details on console connection, see
Chapter 3 .
■
When a login fails, see Appendix D .
Note –
In this manual, the window of the XSCF Shell terminal is called the XSCF
console.
5.2.2 Operation From a Terminal Connected to the
Serial Port
This section describes how to log in from a terminal connected to the serial port.
1. After the terminal is connected to the serial port, press the Enter key on the
terminal.
2. Enter a user account and password when prompted by XSCF.
3. Enter XSCF commands at the shell prompt (XSCF>) that is displayed after login
to XSCF.
The following is a login example:
login: jsmith
Password:
xxxxxxxx
XSCF>