Sun Microsystems Netra ct, Руководство по установке

Страница: 50 / 174

32 Netra ct Server Installation Guide • September 2002
FIGURE 4-1
Unpacking a Netra ct Server
3. Grasp one of the handles and pull the handle down and away from the box until
both flaps come completely free from the box sides (
FIGURE 4-1
).
Repeat this step for the handle on the opposite side of the box.
4. Press down on the remaining sides of the box so that all four sides are flattened
down.
5. Grasp the top of the server and tip the server up until it is resting on its base
(
FIGURE 4-1
).
Caution – Use extreme caution in the rest of this procedure to avoid touching the
midplane. The pins on the midplane are very sensitive and could be damaged if
handled improperly.
Lid
Handle
Handle
Flaps
Flaps
Top of the
server
Base of the
server