Sun Microsystems Netra ct, Руководство по установке

Страница: 127 / 174

Chapter 6 Cabling the System 109
FIGURE 6-49
Routing the Wires Out of the Bottom Portion of the Strain Relief Housing
3. Get the tie wrap and insert it into the bottom portion of the strain relief housing.
FIGURE 6-50
Securing the Wires to the Strain Relief Housing
4. Loop the tie wrap over the wires and back out of the strain relief housing and
tighten the tie wrap to secure the wires to the strain relief housing (
FIGURE 6-50
).
5. Lower the top portion of the strain relief housing so that the three prongs on the
top portion insert into the openings in the DC input plug, and push the top and
bottom portions of the strain relief housing together until they snap into place.