Sun Microsystems Netra ct, Руководство по установке

Страница: 68 / 174

50 Netra ct Server Installation Guide • September 2002
The I/O rear transition card brings the ports for a particular I/O card to the rear of
the server. The I/O rear transition card and the front I/O card must be installed in
the same slot in order for the I/O rear transition card to work. For example, if you
installed an I/O rear transition card in I/O slot 3 at the rear of a Netra ct 800 server,
you must also install the accompanying front I/O card in I/O slot 3 at the front of
the Netra ct 800 server.
FIGURE 5-8
and
FIGURE 5-9
give graphical representations of how the front I/O cards
should line up with the I/O rear transition cards. Note that, facing the front of the
server, the I/O slots read from left-to-right, whereas they read from right-to-left facing
the rear of the server.
FIGURE 5-8
shows the buses on a Netra ct 800 server and
FIGURE 5-9
shows the buses
on a Netra ct 400 server.
FIGURE 5-8
Buses for the Netra ct 800 Server (Rear View)
P1
P3
P4
P5
P1
P3
P4
P5
P1
P3
P4
P5
P1
P3
P4
P5
P1
P3
P4
P5
P1
P3
P4
P5
P1
P3
P4
P5
P1
P3
P4
P5
1 2 3 4 5 6 7 8
CompactPCI bus 64-bit extension
H.110 bus
P2 P2 P2 P2 P2 P2 P2 P2
CompactPCI bus 32-bit @ 33 MHz